Protective & Functional Coatings · Manufacturing & SupplyFor distributors, contractors & industrial buyers
LEADERCOATPROTECTIVE & FUNCTIONAL COATINGS
中文Request a Quote
Home/Products/Anti-Corrosion Coatings & Linings/Tank & Pipe Linings/Modified Epoxy Process Tank Lining
Tank & Pipe Linings

Modified Epoxy Process Tank Lining

A smooth epoxy lining for process equipment requiring cleanable internal surfaces. The lining design brings together the contact medium, cleaning cycle and maintenance needs of the food-processing operation.

Request a Quote ↗Explore product ↓
Modified Epoxy Process Tank Lining — Coating material and packaging Enlarge ↗

Coating material and packaging

COATING SYSTEM

What this product is designed to do

A smooth epoxy lining for process equipment requiring cleanable internal surfaces. The lining design brings together the contact medium, cleaning cycle and maintenance needs of the food-processing operation.

Where it fits

LeaderCoat supplies modified epoxy process tank lining for fermentation and pickling basins, food-process containment, washdown zones with compatible substrates. We coordinate the material and packaging with the substrate, application equipment and purchasing volume of your project.

PRODUCT SPECIFICATIONS

Material, application and supply.

Match the coating form and application process to the surface you are protecting. These product characteristics provide a clear starting point for your purchase.

Modified Epoxy Process Tank Lining
Material systemModified epoxy lining for food-process equipment
Suitable surfacesPrepared process tanks and equipment surfaces
Application methodBrush, roller or spray
Packaging & supplyPails and project-volume supply; matched component packs for multi-part materials
Product categoryTank & Pipe Linings
TECHNICAL SELECTION

Key points for specification

Food-contact boundary

Identify direct contact, incidental contact and non-contact zones. Applicable documents must match the exact selected material.

Cleaning and cure

Include cleaning agents, temperature, full cure and pre-use cleaning in the lining plan.

WHERE IT IS USED

Application areas

From the prepared substrate to the finished surface, the coating is configured around the application. We supply materials for new installations, maintenance work and repeat production.

01

Fermentation and pickling basins

02

Food-process containment

03

Washdown zones with compatible substrates

Send the process medium, cleaning chemicals, substrate and destination-market requirements.

APPLICATION & PROCESS

From surface preparation to service.

Prepare a clean substrate, smooth welds and detail corners for continuous coverage. Complete the coating and cure sequence before carrying out the equipment cleaning and commissioning procedure.

Compare products in this category →
LEADERCOAT

Supply that fits your business.

Distribution supply

Build a range around local demand, preferred pack sizes and repeat purchasing. We organise the product selection, packaging requirements and order mix together so each shipment supports your sales plan.

Project supply

Plan the coating system by substrate, area and application sequence. Share drawings, operating conditions and delivery stages so primer, protective layers and finishing materials can be coordinated for the job.

Production supply

Connect material selection with your coating, dispensing or printing process. Define batch demand, application equipment and the production cycle to organise suitable packaging and recurring deliveries.

SPECIFY YOUR REQUIREMENT

Details for a useful quotation

Send the process medium, cleaning chemicals, substrate and destination-market requirements.

Discuss your requirements ↗
  1. Tank or pipe material and geometry
  2. Stored medium, concentration and temperature
  3. Immersion and cleaning cycles
  4. Any food-contact or drinking-water requirement
BEFORE YOU SPECIFY

Questions before selection

How is this coating applied?

Prepare a clean substrate, smooth welds and detail corners for continuous coverage. Complete the coating and cure sequence before carrying out the equipment cleaning and commissioning procedure.

What packaging can I order?

Pails and project-volume supply; matched component packs for multi-part materials

What information is needed for a quotation?

Send the process medium, cleaning chemicals, substrate and destination-market requirements.

MORE IN THIS CATEGORY

Related products

IPN8710 Anti-Corrosion Pipe & Tank Lining — Pipe and water infrastructure applications
01

IPN8710 Anti-Corrosion Pipe & Tank Lining

A continuous internal barrier protects water-handling surfaces and supports a smooth, maintainable lining. The primer establishes adhesion while the finish forms the water-contact surface.

View product
Coal Tar Epoxy Pipe Coating — Coating material and packaging
02

Coal Tar Epoxy Pipe Coating

Combines an epoxy binder with a bituminous barrier for buried and wet-service infrastructure. Its dark film suits pipe exteriors and protected surfaces where barrier protection is the main requirement.

View product
Epoxy FRP Pipe Lining System — Glass-fibre reinforced pipe structure
03

Epoxy FRP Pipe Lining System

A reinforced internal lining combines the barrier function of epoxy with glass-fibre support. The layered construction allows the lining arrangement to follow pipe geometry, connections and service requirements.

View product
LEADERCOAT

Start with your application.

Share the substrate, operating conditions and supply requirement. Let’s define the coating category and the details needed for your quotation.

Request a Quote ↗

Search products

Anti-Corrosion Coatings & LiningsProtection for metal, equipment and process surfacesPeelable & Temporary Protective CoatingsSurface protection and masking with a defined removal methodGlass CoatingsPrivacy, light control and removable glass finishesWaterproofing & Repair MaterialsWaterproofing layers, surface repairs and supporting resinsGlass Flake & Vinyl Ester CoatingsBarrier coatings and resin systems for process environmentsHigh-Temperature CoatingsProtective finishes for heat-exposed metalMetal Protective TopcoatsExterior finish layers for compatible protective systemsZinc-Rich CoatingsZinc-rich layers within steel protection systemsTank & Pipe LiningsInternal protection selected for the contained mediumWear-Resistant CoatingsProtection selected for the actual wear mechanismMulti-Surface Peelable CoatingsRemovable protection for installation and handlingLiquid Masking CoatingsApplied masks for controlled paint-process boundariesAutomotive Peelable CoatingsSpray-applied removable finishes for compatible vehicle surfacesWater-Removable Temporary CoatingsTemporary films selected for a water-removal processElectronic Protection & Masking MaterialsTemporary masks for defined electronic processesFrosted Glass Privacy CoatingsDiffused daylight with reduced visibilityOpaque Glass CoatingsOpaque finishes for visual screeningPeelable Frosted Glass CoatingsRemovable privacy finishes with a frosted effectCrystalline Waterproofing CoatingsCement-based surface treatments for compatible concreteLiquid Waterproofing CoatingsSite-applied waterproofing layers for defined substratesTransparent Waterproofing CoatingsSurface waterproofing where the visible finish mattersEpoxy Repair MaterialsResin-based repairs selected for defect and placementSupporting ResinsResin supply for defined formulation and application systemsIPN8710 Anti-Corrosion Pipe & Tank LiningA continuous internal barrier protects water-handling surfaces and supports a smooth, maintainable lining. The primer establishes adhesion while the finish forms the water-contact surface.Acrylic Polyurethane Metal TopcoatCombines an exterior colour finish with a protective top layer for structural steel and equipment. Colour and gloss can be coordinated across machinery, frames and fabricated parts.Vinyl Ester Glass Flake MasticOverlapping glass flakes create a longer penetration path through the resin lining. The mastic form allows a substantial barrier to be built around vessels, ducts and chemical containment details.Modified Vinyl Ester Protective CoatingProvides a resin-based protective surface for chemical processing and wastewater infrastructure. The coating can be arranged as a primer, protective build and finish to cover both broad areas and detailed connections.Coal Tar Epoxy Pipe CoatingCombines an epoxy binder with a bituminous barrier for buried and wet-service infrastructure. Its dark film suits pipe exteriors and protected surfaces where barrier protection is the main requirement.901 Epoxy Vinyl Ester ResinA resin base for corrosion-resistant composites, linings and formulated protective materials. Its liquid form supports fibre wet-out and the production of shaped composite parts or reinforced surface layers.Urushiol Titanium Protective CoatingA specialist protective finish for industrial equipment and surfaces facing chemical exposure. It forms an adherent barrier and can be incorporated into maintenance coating systems for tanks, pipework and plant surfaces.Epoxy Repair PuttyA paste-grade repair material for local voids, edge defects and surface levelling. The non-flowing application form helps place material into small cavities and prepare a sound surface for subsequent coating.Epoxy Repair MortarA resin-and-aggregate repair material for rebuilding worn or damaged concrete profiles. It supports deeper local repairs, floor edges and equipment bases that require a shaped, load-bearing repair layer.Silicone Aluminum Heat-Resistant CoatingA metallic heat-resistant finish for hot pipework and industrial equipment. The aluminium-pigmented surface provides a silver appearance while the silicone binder serves the elevated-temperature coating duty.Silicon Carbide Wear-Resistant CoatingHard silicon carbide particles form the working wear surface within a binding matrix. The material suits equipment exposed to abrasive particles, including pump components, chutes and slurry-handling details.High-Temperature Chloride-Exposure CoatingProtective coating selection for equipment where heat and chloride-bearing exposure occur together. The system is configured around the gas or liquid phase, temperature cycle and surface conditions of the process.Epoxy FRP Pipe Lining SystemA reinforced internal lining combines the barrier function of epoxy with glass-fibre support. The layered construction allows the lining arrangement to follow pipe geometry, connections and service requirements.Silicone High-Temperature CoatingA silicone-based protective finish for exhausts, hot pipework, ovens and other heated metalwork. The coating is selected around operating temperature, heating cycles and the required surface appearance.Chlorinated Rubber Marine Protective CoatingAn industrial and marine maintenance coating for exposed steelwork and equipment. Its film-forming system supports practical recoating and colour finishing within a compatible protective build.Cold-Applied Zinc-Rich CoatingA zinc-rich coating restores protective coverage at cut edges, welds and damaged galvanized areas. It also supports maintenance protection on small steel components and difficult-to-access details.Conductive Tank LiningCombines corrosion protection with a conductive path through the tank-lining system. It is used where tank operation requires electrostatic control alongside protection of the metal surface.Modified Epoxy Process Tank LiningA smooth epoxy lining for process equipment requiring cleanable internal surfaces. The lining design brings together the contact medium, cleaning cycle and maintenance needs of the food-processing operation.Light-Colored Conductive Epoxy CoatingA light-coloured conductive lining supports internal visibility while providing electrostatic control. Non-carbon conductive fillers allow the lining appearance to be coordinated with tank inspection and maintenance needs.Epoxy Phenolic Tank TopcoatA crosslinked epoxy-phenolic lining for chemical storage and process containment. The system is designed around the stored medium, immersion duty and cleaning sequence to form a continuous internal barrier.Epoxy Zinc-Rich PrimerA zinc-rich epoxy base layer protects prepared steel and provides the starting point for a multi-coat corrosion system. It works with barrier intermediates and weather-resistant finishes on structures and equipment.Epoxy Glass Flake CoatingGlass flakes reinforce an epoxy barrier to extend the route that moisture and process media travel through the film. The coating suits protective lining systems and heavy-duty surface protection.Solvent-Free Epoxy Tank LiningA solvent-free epoxy system builds a continuous protective lining inside tanks and containment structures. The formulation supports substantial film build with the application process organised around mixing and curing.Epoxy Crack Injection ResinA flowing epoxy resin fills accessible static cracks and bonds the prepared crack faces. Injection allows material to enter the crack path and supports local restoration of concrete continuity.Fluoropolymer Metal TopcoatAn exterior finishing system for metalwork where weathering and appearance retention are central requirements. It provides a colour-coordinated top layer for structures, equipment and architectural metal components.Ceramic-Filled Epoxy Wear LiningCeramic particles in an epoxy matrix create a rebuildable wear surface for particle-handling equipment. The lining can restore profiles and protect elbows, housings and chutes exposed to abrasive flow.Multi-Surface Peelable Protective CoatingForms a continuous removable film over finished surfaces during installation and handling. The liquid application follows contours and covers awkward shapes, while the film is peeled away after the protection period.Water-Based Elastic Peelable CoatingA water-carried coating dries into a flexible temporary film. Elasticity supports continuous peeling around contours and allows the film to protect finished components through handling and installation.Peelable Wheel Colour SprayAdds a removable colour finish to vehicle wheels for styling and refurbishment. The spray format reaches spokes and contours while allowing the original finish to be revealed when the film is removed.Peelable Liquid Protection for ComponentsCreates temporary coverage during fabrication, assembly and transport. It can cover large panels or shaped parts where a liquid-applied film helps simplify protection of the complete surface.Spray-On Removable Automotive CoatingA removable coating gives vehicle panels a coordinated colour finish without using sheet film. Spray application follows complex body contours and supports a consistent appearance across adjoining panels.Peelable Mask for Metal ProcessingDefines protected areas during selected metal-treatment operations. The coating follows edges and recesses to form a removable mask, helping separate working surfaces from areas that should remain covered.Water-Washable Temporary Vehicle ColourCreates short-term visual markings and colour effects for vehicle displays, events and promotional work. The finish is designed around later washing, making it useful for applications with a planned removal time.Peelable Frosted Glass CoatingCombines a diffused glass appearance with later film removal. It suits changing interior layouts, temporary privacy zones and decorative glazing where the finish needs to be renewed or removed.Water-Removable Temporary ProtectionProtects a surface through temporary handling or processing with a water-based removal route. It suits operations where access to wash equipment makes rinsing a practical part of the finishing sequence.Clear Peelable Furniture Protection SprayAdds a transparent removable film while keeping the underlying finish visible. It is intended for finished decorative surfaces where temporary coverage and later peeling are part of the protection plan.Peelable Aerosol Protective SprayProvides a portable spray format for temporary protection and removable finishes. The aerosol is convenient for smaller parts, local protection areas and maintenance work where a spray gun is unnecessary.Peelable PCB Solder MaskMasks selected circuit-board areas during soldering and assembly. The temporary film covers connectors, holes or keep-out zones and is removed after the protected production stage.Peelable Liquid Paint MaskA liquid mask covers broad or irregular areas against paint overspray. It follows the surface contour and is peeled away with the captured overspray after the painting operation.Peelable Blue Glue for LCM ProcessingA temporary protective adhesive for selected liquid-crystal-module operations. Local application supports defined protection boundaries around sensitive assembly areas, with removal built into the process sequence.Peelable Blue Coating for LCD & ITOProvides temporary patterned protection on selected display and conductive-glass surfaces. Controlled coating placement helps define the areas exposed to processing and the areas protected until removal.Translucent Frosted Glass Privacy CoatingCreates a frosted privacy finish that diffuses the view while retaining soft daylight. It suits offices, bathrooms and interior partitions where a screened view and natural light are both desired.Opaque Privacy Glass CoatingForms a covering finish for glass where visual screening takes priority. It suits private rooms, back-of-house glazing and display-window areas needing a stronger reduction of visibility and transmitted light.Cementitious Crystalline Waterproofing CoatingActive components work within the concrete pore structure to restrict water pathways. The mineral treatment integrates with the substrate and suits concrete tanks, basements and water-retaining structures.Qingning Polyurethane Waterproofing CoatingA liquid-applied polyurethane layer provides continuous waterproofing around complex concrete surfaces. It suits tank walls, channels and construction details that benefit from a joint-free coating.Water-Based Roof Waterproofing CoatingA liquid-applied roof membrane follows roof contours and details to form a continuous protective surface. It suits roof refurbishment where broad areas, upstands and penetrations need an integrated coating.Clear Waterproofing Coating for TilesForms a clear protective layer over an existing decorative surface. It supports accessible surface waterproofing and local repair while keeping the colour and pattern of the underlying finish visible.Two-Component Polymer-Cement Waterproofing SlurryCombines a polymer liquid and cementitious powder to form a waterproof layer on mineral substrates. It fits wet-area construction beneath later finishes, with continuous treatment around corners and pipe penetrations.