Find the coating by its function.
Browse the product range by protection function, then narrow the choice by substrate, exposure and application process. Each coating page sets out its use and the details needed for selection.
Anti-Corrosion Coatings & Linings
Select protective coatings by substrate, exposure and coating system. Atmospheric corrosion, chemical immersion, heat and abrasion impose different demands on primers, intermediate layers, topcoats and linings.
Glass Flake & Vinyl Ester Coatings
Barrier coatings and resin systems for process environments
Explore categoryHigh-Temperature Coatings
Protective finishes for heat-exposed metal
Explore categoryMetal Protective Topcoats
Exterior finish layers for compatible protective systems
Explore categoryZinc-Rich Coatings
Zinc-rich layers within steel protection systems
Explore categoryTank & Pipe Linings
Internal protection selected for the contained medium
Explore categoryWear-Resistant Coatings
Protection selected for the actual wear mechanism
Explore categoryProducts in this family
IPN8710 Anti-Corrosion Pipe & Tank Lining
A continuous internal barrier protects water-handling surfaces and supports a smooth, maintainable lining. The primer establishes adhesion while the finish forms the water-contact surface.
View product
Acrylic Polyurethane Metal Topcoat
Combines an exterior colour finish with a protective top layer for structural steel and equipment. Colour and gloss can be coordinated across machinery, frames and fabricated parts.
View product
Vinyl Ester Glass Flake Mastic
Overlapping glass flakes create a longer penetration path through the resin lining. The mastic form allows a substantial barrier to be built around vessels, ducts and chemical containment details.
View product
Modified Vinyl Ester Protective Coating
Provides a resin-based protective surface for chemical processing and wastewater infrastructure. The coating can be arranged as a primer, protective build and finish to cover both broad areas and detailed connections.
View product
Coal Tar Epoxy Pipe Coating
Combines an epoxy binder with a bituminous barrier for buried and wet-service infrastructure. Its dark film suits pipe exteriors and protected surfaces where barrier protection is the main requirement.
View product
Urushiol Titanium Protective Coating
A specialist protective finish for industrial equipment and surfaces facing chemical exposure. It forms an adherent barrier and can be incorporated into maintenance coating systems for tanks, pipework and plant surfaces.
View product
Silicone Aluminum Heat-Resistant Coating
A metallic heat-resistant finish for hot pipework and industrial equipment. The aluminium-pigmented surface provides a silver appearance while the silicone binder serves the elevated-temperature coating duty.
View product
Silicon Carbide Wear-Resistant Coating
Hard silicon carbide particles form the working wear surface within a binding matrix. The material suits equipment exposed to abrasive particles, including pump components, chutes and slurry-handling details.
View product
High-Temperature Chloride-Exposure Coating
Protective coating selection for equipment where heat and chloride-bearing exposure occur together. The system is configured around the gas or liquid phase, temperature cycle and surface conditions of the process.
View product
Epoxy FRP Pipe Lining System
A reinforced internal lining combines the barrier function of epoxy with glass-fibre support. The layered construction allows the lining arrangement to follow pipe geometry, connections and service requirements.
View product
Silicone High-Temperature Coating
A silicone-based protective finish for exhausts, hot pipework, ovens and other heated metalwork. The coating is selected around operating temperature, heating cycles and the required surface appearance.
View product
Chlorinated Rubber Marine Protective Coating
An industrial and marine maintenance coating for exposed steelwork and equipment. Its film-forming system supports practical recoating and colour finishing within a compatible protective build.
View product
Cold-Applied Zinc-Rich Coating
A zinc-rich coating restores protective coverage at cut edges, welds and damaged galvanized areas. It also supports maintenance protection on small steel components and difficult-to-access details.
View product
Conductive Tank Lining
Combines corrosion protection with a conductive path through the tank-lining system. It is used where tank operation requires electrostatic control alongside protection of the metal surface.
View product
Modified Epoxy Process Tank Lining
A smooth epoxy lining for process equipment requiring cleanable internal surfaces. The lining design brings together the contact medium, cleaning cycle and maintenance needs of the food-processing operation.
View product
Light-Colored Conductive Epoxy Coating
A light-coloured conductive lining supports internal visibility while providing electrostatic control. Non-carbon conductive fillers allow the lining appearance to be coordinated with tank inspection and maintenance needs.
View product
Epoxy Phenolic Tank Topcoat
A crosslinked epoxy-phenolic lining for chemical storage and process containment. The system is designed around the stored medium, immersion duty and cleaning sequence to form a continuous internal barrier.
View product
Epoxy Zinc-Rich Primer
A zinc-rich epoxy base layer protects prepared steel and provides the starting point for a multi-coat corrosion system. It works with barrier intermediates and weather-resistant finishes on structures and equipment.
View product
Epoxy Glass Flake Coating
Glass flakes reinforce an epoxy barrier to extend the route that moisture and process media travel through the film. The coating suits protective lining systems and heavy-duty surface protection.
View product
Solvent-Free Epoxy Tank Lining
A solvent-free epoxy system builds a continuous protective lining inside tanks and containment structures. The formulation supports substantial film build with the application process organised around mixing and curing.
View product
Fluoropolymer Metal Topcoat
An exterior finishing system for metalwork where weathering and appearance retention are central requirements. It provides a colour-coordinated top layer for structures, equipment and architectural metal components.
View product
Ceramic-Filled Epoxy Wear Lining
Ceramic particles in an epoxy matrix create a rebuildable wear surface for particle-handling equipment. The lining can restore profiles and protect elbows, housings and chutes exposed to abrasive flow.
View productPeelable & Temporary Protective Coatings
Protect exposed surfaces during processing, installation, storage or finishing. Select temporary coatings by what they protect, how long they remain in place and how they will be removed. Peelable films, water-removable coatings and electronic masks require different checks.
Multi-Surface Peelable Coatings
Removable protection for installation and handling
Explore categoryLiquid Masking Coatings
Applied masks for controlled paint-process boundaries
Explore categoryAutomotive Peelable Coatings
Spray-applied removable finishes for compatible vehicle surfaces
Explore categoryWater-Removable Temporary Coatings
Temporary films selected for a water-removal process
Explore categoryElectronic Protection & Masking Materials
Temporary masks for defined electronic processes
Explore categoryProducts in this family
Multi-Surface Peelable Protective Coating
Forms a continuous removable film over finished surfaces during installation and handling. The liquid application follows contours and covers awkward shapes, while the film is peeled away after the protection period.
View product
Water-Based Elastic Peelable Coating
A water-carried coating dries into a flexible temporary film. Elasticity supports continuous peeling around contours and allows the film to protect finished components through handling and installation.
View product
Peelable Wheel Colour Spray
Adds a removable colour finish to vehicle wheels for styling and refurbishment. The spray format reaches spokes and contours while allowing the original finish to be revealed when the film is removed.
View product
Peelable Liquid Protection for Components
Creates temporary coverage during fabrication, assembly and transport. It can cover large panels or shaped parts where a liquid-applied film helps simplify protection of the complete surface.
View product
Spray-On Removable Automotive Coating
A removable coating gives vehicle panels a coordinated colour finish without using sheet film. Spray application follows complex body contours and supports a consistent appearance across adjoining panels.
View product
Peelable Mask for Metal Processing
Defines protected areas during selected metal-treatment operations. The coating follows edges and recesses to form a removable mask, helping separate working surfaces from areas that should remain covered.
View product
Water-Washable Temporary Vehicle Colour
Creates short-term visual markings and colour effects for vehicle displays, events and promotional work. The finish is designed around later washing, making it useful for applications with a planned removal time.
View product
Water-Removable Temporary Protection
Protects a surface through temporary handling or processing with a water-based removal route. It suits operations where access to wash equipment makes rinsing a practical part of the finishing sequence.
View product
Clear Peelable Furniture Protection Spray
Adds a transparent removable film while keeping the underlying finish visible. It is intended for finished decorative surfaces where temporary coverage and later peeling are part of the protection plan.
View product
Peelable Aerosol Protective Spray
Provides a portable spray format for temporary protection and removable finishes. The aerosol is convenient for smaller parts, local protection areas and maintenance work where a spray gun is unnecessary.
View product
Peelable PCB Solder Mask
Masks selected circuit-board areas during soldering and assembly. The temporary film covers connectors, holes or keep-out zones and is removed after the protected production stage.
View product
Peelable Liquid Paint Mask
A liquid mask covers broad or irregular areas against paint overspray. It follows the surface contour and is peeled away with the captured overspray after the painting operation.
View product
Peelable Blue Glue for LCM Processing
A temporary protective adhesive for selected liquid-crystal-module operations. Local application supports defined protection boundaries around sensitive assembly areas, with removal built into the process sequence.
View product
Peelable Blue Coating for LCD & ITO
Provides temporary patterned protection on selected display and conductive-glass surfaces. Controlled coating placement helps define the areas exposed to processing and the areas protected until removal.
View productGlass Coatings
Choose glass coatings by optical effect and service life. Frosted coatings diffuse light, opaque coatings block the view with an opaque film, and peelable frosted coatings provide a removable finish. These are different specifications even when used on the same window.
Frosted Glass Privacy Coatings
Diffused daylight with reduced visibility
Explore categoryOpaque Glass Coatings
Opaque finishes for visual screening
Explore categoryPeelable Frosted Glass Coatings
Removable privacy finishes with a frosted effect
Explore categoryProducts in this family
Peelable Frosted Glass Coating
Combines a diffused glass appearance with later film removal. It suits changing interior layouts, temporary privacy zones and decorative glazing where the finish needs to be renewed or removed.
View product
Translucent Frosted Glass Privacy Coating
Creates a frosted privacy finish that diffuses the view while retaining soft daylight. It suits offices, bathrooms and interior partitions where a screened view and natural light are both desired.
View product
Opaque Privacy Glass Coating
Forms a covering finish for glass where visual screening takes priority. It suits private rooms, back-of-house glazing and display-window areas needing a stronger reduction of visibility and transmitted light.
View productWaterproofing & Repair Materials
Select materials after identifying the substrate and the path of water entry. Waterproof coatings, crystalline treatments, transparent surface coatings and epoxy repairs perform different tasks. Repair unstable joints and substrate defects before relying on a surface coating.
Crystalline Waterproofing Coatings
Cement-based surface treatments for compatible concrete
Explore categoryLiquid Waterproofing Coatings
Site-applied waterproofing layers for defined substrates
Explore categoryTransparent Waterproofing Coatings
Surface waterproofing where the visible finish matters
Explore categoryEpoxy Repair Materials
Resin-based repairs selected for defect and placement
Explore categorySupporting Resins
Resin supply for defined formulation and application systems
Explore categoryProducts in this family
901 Epoxy Vinyl Ester Resin
A resin base for corrosion-resistant composites, linings and formulated protective materials. Its liquid form supports fibre wet-out and the production of shaped composite parts or reinforced surface layers.
View product
Epoxy Repair Putty
A paste-grade repair material for local voids, edge defects and surface levelling. The non-flowing application form helps place material into small cavities and prepare a sound surface for subsequent coating.
View product
Epoxy Repair Mortar
A resin-and-aggregate repair material for rebuilding worn or damaged concrete profiles. It supports deeper local repairs, floor edges and equipment bases that require a shaped, load-bearing repair layer.
View product
Epoxy Crack Injection Resin
A flowing epoxy resin fills accessible static cracks and bonds the prepared crack faces. Injection allows material to enter the crack path and supports local restoration of concrete continuity.
View product
Cementitious Crystalline Waterproofing Coating
Active components work within the concrete pore structure to restrict water pathways. The mineral treatment integrates with the substrate and suits concrete tanks, basements and water-retaining structures.
View product
Qingning Polyurethane Waterproofing Coating
A liquid-applied polyurethane layer provides continuous waterproofing around complex concrete surfaces. It suits tank walls, channels and construction details that benefit from a joint-free coating.
View product
Water-Based Roof Waterproofing Coating
A liquid-applied roof membrane follows roof contours and details to form a continuous protective surface. It suits roof refurbishment where broad areas, upstands and penetrations need an integrated coating.
View product
Clear Waterproofing Coating for Tiles
Forms a clear protective layer over an existing decorative surface. It supports accessible surface waterproofing and local repair while keeping the colour and pattern of the underlying finish visible.
View product
Two-Component Polymer-Cement Waterproofing Slurry
Combines a polymer liquid and cementitious powder to form a waterproof layer on mineral substrates. It fits wet-area construction beneath later finishes, with continuous treatment around corners and pipe penetrations.
View productStart with your application.
Share the substrate, operating conditions and supply requirement. Let’s define the coating category and the details needed for your quotation.