Protective & Functional Coatings · Manufacturing & SupplyFor distributors, contractors & industrial buyers
LEADERCOATPROTECTIVE & FUNCTIONAL COATINGS
中文Request a Quote
LEADERCOAT · PROTECTIVE & FUNCTIONAL COATINGS

The right coating starts with the surface.

Anti-corrosion protection, removable surface protection, glass finishes and waterproofing materials. LeaderCoat connects your application requirements with coating selection and supply through our own factory and selected partners.

Explore Products →Request a Quote ↗
OWNED FACTORYSELECTED PARTNER SUPPLY
SURFACE. FUNCTION. SYSTEM.LC / 04
Functional coatingCompatible systemPrepared substrate
Select by the job the surface needs to perform.
01Anti-Corrosion Coatings & Linings02Peelable & Temporary Protective Coatings03Glass Coatings04Waterproofing & Repair Materials
COATING CATEGORIES

Four coating families. Clear selection paths.

Browse the product range by protection function, then narrow the choice by substrate, exposure and application process. Each coating page sets out its use and the details needed for selection.

Anti-Corrosion Coatings & Linings

Protection for metal, equipment and process surfaces

  • Steel structures and industrial equipment
  • Tank interiors, pipe surfaces and process containment
  • Surfaces exposed to chemicals, heat or abrasion
Explore category

Peelable & Temporary Protective Coatings

Surface protection and masking with a defined removal method

  • Construction and installation surface protection
  • Paint-process masking and removable finishes
  • Temporary protection in electronic assembly
Explore category

Glass Coatings

Privacy, light control and removable glass finishes

  • Office partitions and meeting-room glazing
  • Bathroom windows and privacy glazing
  • Temporary privacy and decorative glass areas
Explore category

Waterproofing & Repair Materials

Waterproofing layers, surface repairs and supporting resins

  • Concrete and cement-based waterproofing
  • Tiled surfaces requiring a transparent finish
  • Local repairs and resin-based repair systems
Explore category
SELECTED PRODUCTS

Start with a specific coating.

Browse representative products across industrial linings, removable protection, glass privacy and waterproofing. Each page explains its use and the conditions that shape selection.

IPN8710 Anti-Corrosion Pipe & Tank Lining — Pipe and water infrastructure applications
01

IPN8710 Anti-Corrosion Pipe & Tank Lining

A continuous internal barrier protects water-handling surfaces and supports a smooth, maintainable lining. The primer establishes adhesion while the finish forms the water-contact surface.

View product
Vinyl Ester Glass Flake Mastic — Coating material and packaging
02

Vinyl Ester Glass Flake Mastic

Overlapping glass flakes create a longer penetration path through the resin lining. The mastic form allows a substantial barrier to be built around vessels, ducts and chemical containment details.

View product
Multi-Surface Peelable Protective Coating — Peelable film on a finished surface
03

Multi-Surface Peelable Protective Coating

Forms a continuous removable film over finished surfaces during installation and handling. The liquid application follows contours and covers awkward shapes, while the film is peeled away after the protection period.

View product
Peelable Liquid Paint Mask — Liquid masking film and removal
04

Peelable Liquid Paint Mask

A liquid mask covers broad or irregular areas against paint overspray. It follows the surface contour and is peeled away with the captured overspray after the painting operation.

View product
Translucent Frosted Glass Privacy Coating — Frosted glass finish and application
05

Translucent Frosted Glass Privacy Coating

Creates a frosted privacy finish that diffuses the view while retaining soft daylight. It suits offices, bathrooms and interior partitions where a screened view and natural light are both desired.

View product
Clear Waterproofing Coating for Tiles — Transparent waterproofing material and application
06

Clear Waterproofing Coating for Tiles

Forms a clear protective layer over an existing decorative surface. It supports accessible surface waterproofing and local repair while keeping the colour and pattern of the underlying finish visible.

View product

View the full product range →

APPLICATION FIRST

Specify the duty before selecting the material.

A product name is only the beginning. The same surface can require a permanent barrier, a temporary film or a decorative finish. We organise selection around the job the coating needs to perform.

01

Define the surface

Identify steel, concrete, glass, tile, plastic or an existing paint finish. Include surface condition and any preparation limits.

02

Describe the exposure

Provide chemicals, temperature, water, sunlight or wear as relevant. Distinguish continuous exposure from occasional contact.

03

Set the finish and process

Specify appearance, permanence or removal method, application equipment and available drying or curing conditions.

04

Define the supply requirement

Share destination, estimated quantity, packaging needs and project or distribution plans so the quotation reflects the intended use.

BUSINESS SUPPLY

Built around the way you purchase.

01

Distributors

Organise a focused range by coating function and market needs. Discuss category coverage, packaging, repeat demand and the product information required by your customers.

  • Category and market alignment
  • Packaging and order planning
  • Information for downstream buyers
Discuss your requirements →
02

Contractors

Start with site conditions and the complete coating sequence. Include preparation, access, details, exposure and the construction schedule when defining the material requirement.

  • Substrate and system selection
  • Application and curing conditions
  • Project quantity and delivery planning
Discuss your requirements →
03

Industrial Procurement

Specify the process the coating will face and the evidence your purchasing decision requires. For repeat use, distinguish material supply from the validation needed on your equipment or components.

  • Process and exposure definition
  • Compatibility and validation needs
  • Supply scope and recurring demand
Discuss your requirements →
ABOUT LEADERCOAT

Manufacturing with a wider supply perspective.

LeaderCoat combines in-house manufacturing and specialist supply to deliver 48 products across industrial corrosion protection, removable surface protection, glass finishes and waterproofing. We coordinate material selection, packaging and order planning for distributors, contractors and industrial production teams.

About LeaderCoat →
01

In-house production

Manufacturing forms the foundation of our supply model.

02

Selected partner supply

External sourcing extends the scope for defined application needs.

03

A clear order scope

Agree the material, source and purchasing conditions for each enquiry.

Questions before selection

Where should I start if I know the application but not the coating name?

Describe the surface, operating environment and desired result. Use the four category families as a starting point, or send the application details through the enquiry form.

How does LeaderCoat support a multi-product order?

Our in-house manufacturing and specialist supply network bring complementary coating families together. We organise the product mix by application, packaging and delivery requirements so distributors and project buyers can source a coordinated range.

What information makes a quotation more useful?

Include the category, substrate, service conditions, quantity, destination and application method. If a project specification or test requirement applies, describe it with the enquiry.

LEADERCOAT

Start with your application.

Share the substrate, operating conditions and supply requirement. Let’s define the coating category and the details needed for your quotation.

Request a Quote ↗

Search products

Anti-Corrosion Coatings & LiningsProtection for metal, equipment and process surfacesPeelable & Temporary Protective CoatingsSurface protection and masking with a defined removal methodGlass CoatingsPrivacy, light control and removable glass finishesWaterproofing & Repair MaterialsWaterproofing layers, surface repairs and supporting resinsGlass Flake & Vinyl Ester CoatingsBarrier coatings and resin systems for process environmentsHigh-Temperature CoatingsProtective finishes for heat-exposed metalMetal Protective TopcoatsExterior finish layers for compatible protective systemsZinc-Rich CoatingsZinc-rich layers within steel protection systemsTank & Pipe LiningsInternal protection selected for the contained mediumWear-Resistant CoatingsProtection selected for the actual wear mechanismMulti-Surface Peelable CoatingsRemovable protection for installation and handlingLiquid Masking CoatingsApplied masks for controlled paint-process boundariesAutomotive Peelable CoatingsSpray-applied removable finishes for compatible vehicle surfacesWater-Removable Temporary CoatingsTemporary films selected for a water-removal processElectronic Protection & Masking MaterialsTemporary masks for defined electronic processesFrosted Glass Privacy CoatingsDiffused daylight with reduced visibilityOpaque Glass CoatingsOpaque finishes for visual screeningPeelable Frosted Glass CoatingsRemovable privacy finishes with a frosted effectCrystalline Waterproofing CoatingsCement-based surface treatments for compatible concreteLiquid Waterproofing CoatingsSite-applied waterproofing layers for defined substratesTransparent Waterproofing CoatingsSurface waterproofing where the visible finish mattersEpoxy Repair MaterialsResin-based repairs selected for defect and placementSupporting ResinsResin supply for defined formulation and application systemsIPN8710 Anti-Corrosion Pipe & Tank LiningA continuous internal barrier protects water-handling surfaces and supports a smooth, maintainable lining. The primer establishes adhesion while the finish forms the water-contact surface.Acrylic Polyurethane Metal TopcoatCombines an exterior colour finish with a protective top layer for structural steel and equipment. Colour and gloss can be coordinated across machinery, frames and fabricated parts.Vinyl Ester Glass Flake MasticOverlapping glass flakes create a longer penetration path through the resin lining. The mastic form allows a substantial barrier to be built around vessels, ducts and chemical containment details.Modified Vinyl Ester Protective CoatingProvides a resin-based protective surface for chemical processing and wastewater infrastructure. The coating can be arranged as a primer, protective build and finish to cover both broad areas and detailed connections.Coal Tar Epoxy Pipe CoatingCombines an epoxy binder with a bituminous barrier for buried and wet-service infrastructure. Its dark film suits pipe exteriors and protected surfaces where barrier protection is the main requirement.901 Epoxy Vinyl Ester ResinA resin base for corrosion-resistant composites, linings and formulated protective materials. Its liquid form supports fibre wet-out and the production of shaped composite parts or reinforced surface layers.Urushiol Titanium Protective CoatingA specialist protective finish for industrial equipment and surfaces facing chemical exposure. It forms an adherent barrier and can be incorporated into maintenance coating systems for tanks, pipework and plant surfaces.Epoxy Repair PuttyA paste-grade repair material for local voids, edge defects and surface levelling. The non-flowing application form helps place material into small cavities and prepare a sound surface for subsequent coating.Epoxy Repair MortarA resin-and-aggregate repair material for rebuilding worn or damaged concrete profiles. It supports deeper local repairs, floor edges and equipment bases that require a shaped, load-bearing repair layer.Silicone Aluminum Heat-Resistant CoatingA metallic heat-resistant finish for hot pipework and industrial equipment. The aluminium-pigmented surface provides a silver appearance while the silicone binder serves the elevated-temperature coating duty.Silicon Carbide Wear-Resistant CoatingHard silicon carbide particles form the working wear surface within a binding matrix. The material suits equipment exposed to abrasive particles, including pump components, chutes and slurry-handling details.High-Temperature Chloride-Exposure CoatingProtective coating selection for equipment where heat and chloride-bearing exposure occur together. The system is configured around the gas or liquid phase, temperature cycle and surface conditions of the process.Epoxy FRP Pipe Lining SystemA reinforced internal lining combines the barrier function of epoxy with glass-fibre support. The layered construction allows the lining arrangement to follow pipe geometry, connections and service requirements.Silicone High-Temperature CoatingA silicone-based protective finish for exhausts, hot pipework, ovens and other heated metalwork. The coating is selected around operating temperature, heating cycles and the required surface appearance.Chlorinated Rubber Marine Protective CoatingAn industrial and marine maintenance coating for exposed steelwork and equipment. Its film-forming system supports practical recoating and colour finishing within a compatible protective build.Cold-Applied Zinc-Rich CoatingA zinc-rich coating restores protective coverage at cut edges, welds and damaged galvanized areas. It also supports maintenance protection on small steel components and difficult-to-access details.Conductive Tank LiningCombines corrosion protection with a conductive path through the tank-lining system. It is used where tank operation requires electrostatic control alongside protection of the metal surface.Modified Epoxy Process Tank LiningA smooth epoxy lining for process equipment requiring cleanable internal surfaces. The lining design brings together the contact medium, cleaning cycle and maintenance needs of the food-processing operation.Light-Colored Conductive Epoxy CoatingA light-coloured conductive lining supports internal visibility while providing electrostatic control. Non-carbon conductive fillers allow the lining appearance to be coordinated with tank inspection and maintenance needs.Epoxy Phenolic Tank TopcoatA crosslinked epoxy-phenolic lining for chemical storage and process containment. The system is designed around the stored medium, immersion duty and cleaning sequence to form a continuous internal barrier.Epoxy Zinc-Rich PrimerA zinc-rich epoxy base layer protects prepared steel and provides the starting point for a multi-coat corrosion system. It works with barrier intermediates and weather-resistant finishes on structures and equipment.Epoxy Glass Flake CoatingGlass flakes reinforce an epoxy barrier to extend the route that moisture and process media travel through the film. The coating suits protective lining systems and heavy-duty surface protection.Solvent-Free Epoxy Tank LiningA solvent-free epoxy system builds a continuous protective lining inside tanks and containment structures. The formulation supports substantial film build with the application process organised around mixing and curing.Epoxy Crack Injection ResinA flowing epoxy resin fills accessible static cracks and bonds the prepared crack faces. Injection allows material to enter the crack path and supports local restoration of concrete continuity.Fluoropolymer Metal TopcoatAn exterior finishing system for metalwork where weathering and appearance retention are central requirements. It provides a colour-coordinated top layer for structures, equipment and architectural metal components.Ceramic-Filled Epoxy Wear LiningCeramic particles in an epoxy matrix create a rebuildable wear surface for particle-handling equipment. The lining can restore profiles and protect elbows, housings and chutes exposed to abrasive flow.Multi-Surface Peelable Protective CoatingForms a continuous removable film over finished surfaces during installation and handling. The liquid application follows contours and covers awkward shapes, while the film is peeled away after the protection period.Water-Based Elastic Peelable CoatingA water-carried coating dries into a flexible temporary film. Elasticity supports continuous peeling around contours and allows the film to protect finished components through handling and installation.Peelable Wheel Colour SprayAdds a removable colour finish to vehicle wheels for styling and refurbishment. The spray format reaches spokes and contours while allowing the original finish to be revealed when the film is removed.Peelable Liquid Protection for ComponentsCreates temporary coverage during fabrication, assembly and transport. It can cover large panels or shaped parts where a liquid-applied film helps simplify protection of the complete surface.Spray-On Removable Automotive CoatingA removable coating gives vehicle panels a coordinated colour finish without using sheet film. Spray application follows complex body contours and supports a consistent appearance across adjoining panels.Peelable Mask for Metal ProcessingDefines protected areas during selected metal-treatment operations. The coating follows edges and recesses to form a removable mask, helping separate working surfaces from areas that should remain covered.Water-Washable Temporary Vehicle ColourCreates short-term visual markings and colour effects for vehicle displays, events and promotional work. The finish is designed around later washing, making it useful for applications with a planned removal time.Peelable Frosted Glass CoatingCombines a diffused glass appearance with later film removal. It suits changing interior layouts, temporary privacy zones and decorative glazing where the finish needs to be renewed or removed.Water-Removable Temporary ProtectionProtects a surface through temporary handling or processing with a water-based removal route. It suits operations where access to wash equipment makes rinsing a practical part of the finishing sequence.Clear Peelable Furniture Protection SprayAdds a transparent removable film while keeping the underlying finish visible. It is intended for finished decorative surfaces where temporary coverage and later peeling are part of the protection plan.Peelable Aerosol Protective SprayProvides a portable spray format for temporary protection and removable finishes. The aerosol is convenient for smaller parts, local protection areas and maintenance work where a spray gun is unnecessary.Peelable PCB Solder MaskMasks selected circuit-board areas during soldering and assembly. The temporary film covers connectors, holes or keep-out zones and is removed after the protected production stage.Peelable Liquid Paint MaskA liquid mask covers broad or irregular areas against paint overspray. It follows the surface contour and is peeled away with the captured overspray after the painting operation.Peelable Blue Glue for LCM ProcessingA temporary protective adhesive for selected liquid-crystal-module operations. Local application supports defined protection boundaries around sensitive assembly areas, with removal built into the process sequence.Peelable Blue Coating for LCD & ITOProvides temporary patterned protection on selected display and conductive-glass surfaces. Controlled coating placement helps define the areas exposed to processing and the areas protected until removal.Translucent Frosted Glass Privacy CoatingCreates a frosted privacy finish that diffuses the view while retaining soft daylight. It suits offices, bathrooms and interior partitions where a screened view and natural light are both desired.Opaque Privacy Glass CoatingForms a covering finish for glass where visual screening takes priority. It suits private rooms, back-of-house glazing and display-window areas needing a stronger reduction of visibility and transmitted light.Cementitious Crystalline Waterproofing CoatingActive components work within the concrete pore structure to restrict water pathways. The mineral treatment integrates with the substrate and suits concrete tanks, basements and water-retaining structures.Qingning Polyurethane Waterproofing CoatingA liquid-applied polyurethane layer provides continuous waterproofing around complex concrete surfaces. It suits tank walls, channels and construction details that benefit from a joint-free coating.Water-Based Roof Waterproofing CoatingA liquid-applied roof membrane follows roof contours and details to form a continuous protective surface. It suits roof refurbishment where broad areas, upstands and penetrations need an integrated coating.Clear Waterproofing Coating for TilesForms a clear protective layer over an existing decorative surface. It supports accessible surface waterproofing and local repair while keeping the colour and pattern of the underlying finish visible.Two-Component Polymer-Cement Waterproofing SlurryCombines a polymer liquid and cementitious powder to form a waterproof layer on mineral substrates. It fits wet-area construction beneath later finishes, with continuous treatment around corners and pipe penetrations.